| # of System LED Blinks
| # of Disk LED Blinks
| Meaning
|
| 1
| 1
| Waiting for software download to the Snap! Server IP Address
|
| 1
| 2
| Snap! Server does not have IP Address; Waiting for a download in broadcast mode
|
| 1
| 3
| New software is downloading over the Network
|
| 1
| 4
| Snap! Server is storing the new software in memory; this can take up to 5 minutes
|
| 2
| 1
| Software download failure due to a network problem; waiting for another software download to the Snap! Server IP address
|
| 2
| 2
| Software download failure due to a network problem; and the server does not have an IP address; waiting for a download broadcast mode
|
| 3
| 1
| Software update completed successfully; system will restart automatically
|
| 3
| 2
| Software update aborted due to numerous network errors. Note: Turn off the unit and try again
|
| 3
| 3
| Software update aborted due to memory programming errors. Note: Turn off the unit and try again
|
| 3
| 4
| Software update aborted due to internal error. Note: Turn off the unit and try again
|
| 3
| 5
| Software update aborted due to checksum error in the transmitted error. Note: Turn off the unit and try again
|
| 3
| 6
| Software update aborted due to an attempt to download incorrect software for this type of Snap! Server. Note: Turn off the unit and try again
|
